# # Input file for Tripoint Industries Galaxy v. 2.00 # Galaxy input file v. 2.00 (January 1, 2014) # WWW : http://www.radarsoftware.com # # --- Number of boundary files to be loaded 1 # # --- For each boundary file, provide a listing of the boundary file name, its # units, and the ICOAT associated with that boundary. # Valid units - 0: meters 1: centimeters 2: millimeters 3: inches # # --- Boundary 1 File Name, Units, ICOAT double_ogive.points 3 0 # # --- Automatically densify boundaries? # (0 = no, 1 = yes) 1 # # --- For densifier, provide the maximum desired segment length in wavelengths 0.1 # # --- Uniformly spaced Frequency Specification. Note: Frequencies should be in GHz. # start end step (step = 0 means just do the first value) 9.0 10.0 0 # # --- Observation type # 0 = Monostatic # 1 = Bistatic 0 # Uniformly spaced angle specification. Note: All angles should be in degrees. # # --- Incident theta : start end step 0.0 180.0 720 # --- Incident phi : start end step 0.0 180.0 0 # --- Observation theta : start end step (these are disregarded if monostatic) 0.0 360.0 720 # --- Observation phi : start end step (these are disregarded if monostatic) 0.0 180.0 0 # # --- Scattered Field Polarization # 0 = Linear # 1 = Circular 0 # # --- Method of Moments Parameters # # --- For CFIE, specify value for alpha (recommended: 0.5) # CFIE = alpha*EFIE + (1 - alpha)*eta*NxMFIE 0.5 # # --- Maximum number of modes 30 # # --- Number of points per half-triangle 5 # # --- Convergence Threshold (dB) -80.0 # # --- Non-PEC Material Support # # 0 = no materials, target is totally PEC # 1 = target may contain PEC and dielectric regions and interfaces 0 # --- If (1) above, provide a filename that describes all bulk dielectric materials. no.material_summary # --- If (1) above, provide a filename that describes all dielectric regions. no.region_summary # --- If (1) above, provide a filename that describes the interfaces between regions. no.interface_summary